Toaster Moulder For Bakery | Toaster Machine

描述

Toaster Moulder

Features:

1.Oil-immersed dividing system

2.Dough thickness and length are adjustable

3:Cylinders are choromium plated,non-stick

Specification:

1.Model No.:NFZ-380
2.Size:1450x670x1100mm
3.The width of the conveyer belt:38cm
4.Processing width:3-40mm
5.Voltage:380V/220V/50HZ
6.Power:1.13 kw
7.N.W.:237kg

Operation:

1. The top small hand wheel is used to adjust the width of the feeding port, and the lock is adjusted before use; the width is based on the principle of sufficient use. When the width is too wide, the dough will exceed the roll surface and cause waste.

2. The two rear large handwheels are used to adjust the gap between the upper and lower two-stage pressing rollers in order to obtain dough with reasonable stiffness and suitable shape. When adjusting, the gap between the upper laminating roller is large and the gap between the lower layers is small, so that the dough can be used in one operation Two times of rolling and stretching are obtained with high efficiency.Toaster Moulder

3. The elasticity of the shaped stainless steel mesh can be adjusted to change the effect of dough processing. The effect of finishing when relaxing is large, and the effect when tightening is small. You can freely choose according to your needs. The shaping net can be removed when pressing the surface separately, and it is very convenient to assemble and disassemble.

4. The shaping plate on the cantilever has a hand wheel to adjust and lift, and the dough is rolled on the special patterned plastic plate at the bottom. The degree of adjustment is adapted to the requirements of the product. It is not used when it is pressed separately.

5. The bracket above the conveyor belt is used to hold materials to save space and is also very convenient for operation.

6. There is a retractable sliding material bending plate under the exit of the conveyor belt. When used, it is pulled out to catch the dough.